KSK-2 40/120


Наявність та ціну уточнюйте!!!

The basic range of heaters designed for installation close to the wall. Devices are installed in rooms with smooth wall surfaces, which reduces the space occupied by it, as well as make it less noticeable in the interior.

The heat carrier is connected to the convectors on the right side or left side. The working temperature of the heat carrier is up to 110 ° C

Excessive working fluid pressure – up to 1.0 MPa

Excessive test pressure – 2.4 MPa

Strength – not less than 6.0 MPa

Connection – G 1/2 (internal thread)


Convector heating “Thermia” KSK-2 40 / xx K

Convector heating “Thermia” KSK-2 40 / xx P

KSK – convector wall with a casing

40 – convector height (cm)

xx – convector length (rounded in cm)

K – end performance;

P – straight through execution.

Delivery set: heating convector, operation manual, individual packaging, set of mounting parts **.

Note. ** – end convectors are equipped with a manual air release valve;

walk-through convectors are equipped with nipples (on order).

There are also versions with a lower connection, with a thermal valve, a dual heat exchanger. All details can be clarified by the sales department.

Weight 15.7 kg
Dimensions 125.7 × 8.5 × 40 cm
Nominal heat flux (70 ° C), W. 1,9
Volume of the heat carrier, dm3 1,06
Heat exchanger material Сталь
Heater type Для рідинних систем опалення
Length, cm 125,7
Connection type Бічне
Center distance, cm 7,5